Home > Engineers & Architects > New Products in 2012
 

NEW PRODUCTS IN 2012

MAGNUM MS150B Helical Piles


Magnum MS150B Helical Piles have 33 tons ultimate capacity and 16 tons working capacity in compression and tension. Lead sections and extensions couple together to extend helical bearing plates to the desired bearing stratum. Square shafts are ideally suited for anchoring/tension applications. Structural capacity calculations are based on average life expectancy of over 75 years for most soil conditions. Patented Magnum Dual-Cutting Edge helical bearing plates (DCE) enhance penetration through dense soils with occasional cobbles and debris. Custom lengths and helix configurations are available upon request. See Magnum Technical Reference Manual for additional information including design tools, prescriptive specifications and example plans. Click HERE to download catalog sheet.

MAGNUM MH850B Helical Piles


Magnum MH850B Helical Piles have 266 tons ultimate capacity and 133 tons working capacity in compression and tension. Lead sections and extensions couple together to extend helical bearing plates to the desired bearing stratum. Round shafts offer increased lateral and buckling resistance compared to solid square shafts. Capacity calculations are based on average life expectancy of over 75 years for most soil conditions. Patented Magnum Dual-Cutting Edge helical bearing plates (DCE) enhance penetration through dense soils with occasional cobbles and debris. Custom lengths and helix configurations are available upon request. See Magnum Technical Reference Manual for additional information including design tools, prescriptive specifications and example plans. Click HERE to download catalog sheet.

MAGNUM MP1027-3 Helical Piles


The Magnum MP1027-3 lifting bracket has 50 tons maximum ultimate capacity, 25 tons working capacity in compression.  The bracket consists of a collar tube with (1) 3/4” threaded bolt holes for connection to Magnum hydraulic rams and 6 thru holes for attachment to existing concrete using concrete expansion anchors.  The bracket is designed in accordance with ICC-ES document AC358 as well as IBC, ACI, and AISC codes.  Design and detailing of the connection to the structure varies by project and is the responsibility of registered design professional including maximum concrete span, pier spacing, concrete shear, and concrete bearing.  Click HERE to download catalog sheet.

MAGNUM MP1600-3 Concentric Lift Cap


The MAGNUM MP1600-3 Concentric Lift Cap is designed for use with steel push piers jacked directly below the footing or load bearing wall for all types of foundation repairs.  The cap has an 8"x8"x1/2" bearing plate for a total of 64 in2 of bearing area.  Rather than costly and less stable multiple threadbars, the MHC1600-3 cap uses the same 3-1/8" collar lock-off technology as other Magnum push piering systems.  Lock-off using one, two or three 3/4" ASTM A490 high strength bolts.  The advantage of this system over others is in its simplicity and  strength.  More stable and easier to use, the MP1600-3 will provide long lasting support at an economic price.  Click HERE to download catalog sheet.


Contact Magnum Piering  :  Residential  :  Homeowners  :  Commercial & Industrial
Engineers & Architects  :  Dealership :Foundation Repair
Copyright © 2005-2017 Magnum Piering, Inc. All Rights Reserved 6082 Schumacher Park Drive, West Chester, OH 45069  (phone) 800-822-7437 (fax) 513-777-5374