MSC1084-150B Tie-Back Cap 20 Tons Capacity
Magnum MSC1084-150B tie back anchor cap consist of a collar tube with bolt holes for connection to MAGNUM® helical piles and a circular bearing plate with an integrated nut. MAGNUM® products are manufactured in the USA according to our ISO 9001 approved quality program. Structural capacities are developed according to AISC 360 considering an average design life of 75 years for hot-dip galvanized steel in most soil conditions. Bare steel is available upon request. Design and detailing of the structure, to which bearing plate cap is attached varies by project. It is the responsibility of the registered design professional.
Description
Install a MAGNUM® Helical Pile to the correct depth, torque, and capacity. Cut-off the pile shaft at the proper elevation. Drill (1) 15/16” diameter hole through the shaft using a MAGNUM® drill template. Place the anchor cap over the shaft and secure with (1) 7/8” bolt. Snug tighten nut. Pass thread bar with nut through the hole in the end plate and make necessary attachments.
Additional information
| Allowable Compression/Tension (Tons) | |
|---|---|
| Ultimate Compression/Tension (Tons) | NA / 35 Tons |
| Helical Pile Compatibility |
