MHC2161-3T1 6x6 Post Cap Allowable Capacity 16
MHC2161-3T1 6x6 Post Cap Allowable Capacity 16 - Image 2

MHC2161-3T1 6×6 Post Cap Allowable Capacity 16

MHC2161-3T1 6×6 post cap consist of a collar tube with bolt holes for connection to MAGNUM® helical piles and a circular bearing plate with an integrated nut. MAGNUM® products are manufactured in the USA according to our ISO 9001 approved quality program. Structural capacities are developed according to AISC 360 considering an average design life of 75 years for hot-dip galvanized steel in most soil conditions. Bare steel is available upon request. Design and detailing of the structure, to which bearing plate cap is attached varies by project. It is the responsibility of the registered design professional.

Categories: , , , , Tag:

Description

Protect pile cap and bolt from weather prior to installation. After installtion of a Magnum Helical Pile to the correct depth, torque, and capacity, cut-off the pile shaft square at the proper elevation. Place the pile cap over the shaft and secure with (1) 3/4”-16 bolt. Ensure direct bearing of post base on shaft. Tighten bolt to a minimum torque of 50ft-lbs. Do not exceed 60ft-lbs. Place wood post and fasten with 1/2” lag screws.

 

Additional information

Allowable Compression/ Tension (Tons)

16 Tons / 0.5 Tons
Ultimate Compression/Tension Tons

32 Tons / 1 Ton
Helical Pile Compatibility

https://magnumpiering.com/products/mh313b-helical-piles/
https://magnumpiering.com/products/mh313br-helical-piles/
https://magnumpiering.com/products/mh325b-helical-piles/
https://magnumpiering.com/products/mh325br-helical-piles/
https://magnumpiering.com/products/mh325br-6-helical-piles/

You may also like…

Related products