MAGNUM® MP1005-3 Gusseted Angle

Call for a Quote

In Stock

8″ x 8″ x 12″ x 1/2″ Angle with (6) 9/16″ Thru Holes & 3.13″ I.D. Collar

Data Sheet

SKU: MP1005-3_ Category:


The Magnum MP1005-3 plate bracket has 50 tons maximum ultimate capacity, 25 tons working capacity in compression and 16 tons maximum capacity, 8 tons working capacity in tension. The bracket consists of a collar tube with (3) 3/4? threaded bolt holes for connection to Magnum helical piles and Magnum push piers and (6) thru holes for attachment to existing concrete using expansion anchors. The bracket is designed in accordance with ICC-ES document AC358 as well as IBC, ACI, and AISC codes. Design and detailing of the connection to the structure varies by project and is the responsibility of registered design professional including maximum concrete span, pier spacing, concrete shear, and concrete bearing.

Installation Notes:
Prepare the existing foundation. For steel push pier applications, attach the bracket and Magnum ram. Install the push pier to the required pressure and load test. For helical pile applications, excavate the pier location so the helix bearing plates fit below the existing foundation and the shaft is as close as possible to the face of the foundation. Install the helical pile to the correct depth and torque. Mount the bracket by sliding down the shaft rotating into position. In both cases, lift the structure as needed using either a Magnum ram or lifting fixture. Drill holes and bolt the bracket to the pile.

*Bracket connection to pile consists of field threaded blind bolts as described in Section 7-13 of AISC Code. Capacities shown are based on IAS accredited laboratory testing of Magnum products.

All Magnum Products Made in U.S.A.
U.S. Patents 6,058,662 and 5,234,287; Other Patents Pending.

Additional information

Weight 39 lbs
Dimensions 14 × 12 × 12 in
Fits Pile Shaft Designation

MH313, MH313R, MH325, MH325R, MP313, MP325

Collar Tube

0.37 in. x 3.13 in. I.D. ASTM A513 GR65


8" x 8" x 12" x 1/2" Angle with (6) 9/16" Thru Holes for 1/2" Expansion Anchors

Pile Connection

(1, 2, or 3) 3/4" SAE J429 GR8 Zinc Coated to ASTM B695/F1941

Bracket Type

Gusseted Angle

Allow Tensile Capacity-tons


Allow. Comp. Capacity (tons)





There are no reviews yet.

Be the first to review “MAGNUM® MP1005-3 Gusseted Angle”

Your email address will not be published. Required fields are marked *