MAGNUM® MP313 -36″ Push Pier Section

Call for a Quote

In Stock

High-Strength 3.00? Diameter, 0.13? Wall, Round-Shaft Push Piers with Male-Female Slip Connectors

Data Sheet

SKU: MP313-36_ Category:


Magnum? MP313 push piers have a structural capacity in compression of 22 tons ultimate and 11 tons working. Push piers do not have tensile capacity unless the sections are welded together or a reinforcing steel bar and grout is placed in the pile casing. Sections couple together with male-female slip connectors. High strength steel offers increased buckling resistance compared to others. A friction reduction collar can be added to the pile to increase penetration depth. Sections are available in bare steel, epoxy powder coated, and galvanized. Galvanized coating extends average life expectancy to over 100 years even in highly corrosive environments. Custom lengths are available upon request. See Magnum? Technical Manual for additional information.

*Note 1: Structural capacity is based on buckling strength of shaft in firm soils with pinned head conditions after 75 years corrosion for bare steel per ICC-ES AC358. Push piers shall be installed to appropriate depth into
suitable bearing stratum as determined by geotechnical engineer or local practice. For tension capacity, push pier sections must be welded together or a reinforcing steel bar and grout must be placed in the pile.

**Note 2: Push pier capacity is determined by load test using Magnum installation rams or lifting kit. All push piers shall be load tested to 1.5 times the desired working load. Test load is limited by maximum safe operating
ram pressure or buckling capacity of shaft, whichever is less.

All Magnum Products Made in U.S.A.
U.S. Patents 6,058,662 and 5,234,287; Other Patents Pending. NOTE: Many items made to order. Bulk discounts available. Contact Magnum representative regarding price and availability.

Additional information

Weight 13 lbs
Dimensions 39 × 3 × 3 in
Length (in)



HSS 3.00" x 0.13" Wall ASTM A513 Grade 65 KSI, or Equiv.

Standard RAM

8.30 in2 Piston Area, 7, 500 Maximum P.S.I. (4, 000 Max. P.S.I. Installation Pressure)


Inner 0.125? Sleeve

Moment of Inertia

New= 1.17 in(4), Corroded= 0.70 in(4)

Gross Area

New= 1.13 in(2), Corroded= 0.68 in(2)

Section Modulus

New= 0.78 in(3), Corroded= 0.48 in(3)

Allow. Comp. Capacity (tons)





There are no reviews yet.

Be the first to review “MAGNUM® MP313 -36″ Push Pier Section”

Your email address will not be published. Required fields are marked *