MAGNUM® MP7500K Slabjack Ram Kit

2.00″ Bore, 20″ Stroke, 5,000 psi Maximum Pressure
Hydraulic Ram Assembly for MP212 Slabjack Pier Shaft
Data Sheet

SKU: MP7500K Category:

Additional information

Bore

2.00"

Piston Rod

1.25" Dia.

Stroke

22"

Max Pressure

7, 500 si

Burst Pressure

15, 000 psi

Bolts

(10) 1/2" x 4.5" Titen HD or Equiv.

Nose Adapter

1. 75" – Dia. (Fits MP212 Push Pier Shaft)

Hydraulic Hose

3/8" Dia.

Coating

Description

Magnum MP7500 Slabjack Rams are used for lifting and temporary support of slabs-on-grade and other light structures. The ram has an ultimate lifting capacity of 8 tons at maximum pressure. It is used for precision lifting applications in combination with grout injection for longer term support. Ram and stand height is 66 .16″. The assembly can accommodate push pier columns up to 36″ long that are coupled together by male-female slip connections. Additional push pier column sections can be added until the pier reaches adequate bearing material and a successful load test is achieved. Base plate consists of two 6″ x 1 r rectangles with (10) bolt hole pattern. Pier to slab connection, if needed, is by non-shrink grout.

Note: Magnum’s slabjack pie ring system is rated for temporary lifting only Permanent slab support, pier to slab connection, required pier capacity, and pier spacing should be designed by a professional engineer taking into account the thickness, weight, live loads, and punching shear strength of the slab.

All Magnum Products Made in U.S.A.
US Patents 6,058,662 and 5,234,287, Other Patents Pending. NOTE: Many items made to order. Bulk discounts available. Contact Magnum representative regarding price and availability.