MHC1040-3B Bond Bar Cap Allowable Capacity 16 Tons

MHC1040-3B bond bar cap has 32 tons ultimate capacity, 16 tons allowable capacity in compression and tension. The bond bar cap consists of a collar tube with bolt hole for connection to Magnum helical piles. It includes a vertical reinforcing steel bars for attachment to cast-in-place concrete for new construction and foundation augmentation. The bond bar cap is designed in accordance with ICC-ES document AC358 as well as IBC, ACI,and AISC codes. Design and detailing of the structure to which the helical pile cap is attached varies by project and is the responsibility of registered design professional including minimum concrete cover for one-way shear, two-way punching shear, and bearing.

Additional information

Allowable Compression/ Tension (Tons)

16 Tons / 16 Tons

Ultimate Compression/Tension (Tons)

32 Tons / 32 Tons

Helical Pile Compatibility

https://www.magnumpiering.com/products/mh313b-helical-piles/
https://www.magnumpiering.com/products/mh313br-helical-piles/
https://www.magnumpiering.com/products/mh325b-helical-piles/

Description

MHC1040-3B Bond Bar Cap

After installation of a MAGNUM® Helical Pile to the correct depth, torque, and capacity, cut-off the pile shaft at the proper elevation. Drill (1) 15/16” diameter hole through the shaft using a MAGNUM® drill template, place the cap over the shaft and secure with (1) 7/8” bolt. Snug tighten nut. Reinforcing steel development length to be checked by registered design professional. Place reinforcing steel, cast concrete and consolidate around the pile cap per project requirements.