MP1015-3 Light Angle Allowable Capacity 12 Tons
MP1015-3 Light Angle Bracket consists of a collar tube with (2) 3/4˝ threaded bolt holes for connection to MAGNUM® Push Piers or Helical Piles and a steel angle with thru holes for attachment to existing concrete using expansion anchors. MAGNUM® products are manufactured in the USA according to our ISO 9001 approved quality program. MAGNUM® brackets are designed in accordance with ICC-AC358, IBC, ACI, and AISC codes. Design and detailing of the connection to the structure varies by project and is the responsibility of the registered design professional including maximum concrete span, pier spacing, concrete shear, and concrete bearing.
Additional information
Connection Type | |
---|---|
Allowable Capacity (ton) by Connection Type | 5 Tons, 8 Tons |
Ultimate Capacity (ton) by Connection Type | 10 Tons, 17 Tons |
Pile Size Compatibility | https://www.magnumpiering.com/products/mh313b-helical-piles/ |
Description
Prepare the existing foundation. For steel push pier applications, apply a grout bed of high strength, fast setting, non-shrink grout at a minimum of 1/2” thick to the bottom angle face, then attach the bracket and MAGNUM® ram. Install the push pier to the required pressure and load test. For helical pile applications, excavate the pier location so the helix bearing plates fit below the existing foundation and the shaft is as close as possible to the face of the foundation. Install the helical pile to the correct depth and torque. Mount the bracket by sliding down the shaft and rotating into position. Prior to sliding bracket into position, apply a grout bed of high strength, fast setting, non-shrink grout at a minimum of 1/2” thick to the bottom angle face. In both cases, lift the structure as needed using either a MAGNUM® ram or lifting fixture. Drill holes and bolt the bracket to the pile. (Expansion Anchors Sold Separately)
You may also like…
-
MH325BR Helical Piles 50 Ton Ultimate – 25 Ton Allowable Capacity
Download Cut Sheet -
MH325B Helical Piles 33 Ton Ultimate – 16.5 Ton Allowable Capacity
Download Cut Sheet -
MH313B Helical Piles 18 Ton Ultimate – 9 Ton Allowable Capacity
Download Cut Sheet -
MP325 Push Pier 21 Tons Allowable Capacity
Download Cut Sheet -
MP313 Push Pier 11 Tons Allowable Capacity
Download Cut Sheet