MP1017-3 Tie-Back Bracket Allowable Capacity 16 Tons
MP1017-3 Tie-Back bracket consists of a plate and two gussets for connection to MAGNUM® helical piles and thru holes for attachment to existing concrete using expansion anchors. MAGNUM® products are manufactured in the USA according to our ISO 9001 approved quality program. The bracket is designed in accordance with ICC-AC358, IBC, ACI, and AISC codes. Design and detailing of the connection to the structure varies by project. It is the responsibility of the registered design professional including maximum concrete span, anchor spacing, concrete shear, and concrete bearing.
Additional information
Allowable Capacity Tension | 16 Tons |
---|---|
Ultimate Capacity Tension | 32 Tons |
Helical Pile Compatibility | https://www.magnumpiering.com/products/mh313b-helical-piles/ |
Description
Prepare the existing foundation. Install the helical anchor to the correct depth and torque. Install a MAGNUM® MHC1080 pile cap on the anchor. Mount the bracket by sliding down over the thread bar into position. Secure to the anchor and post-tension as required for the project. Use spherical or wedge washer if anchor is not sufficiently perpendicular to bearing plate. (Expansion Anchors Sold Separately)
You may also like…
-
MH3521U Helical Piles 40 Ton Ultimate – 20 Ton Allowable Capacity
Download Cut Sheet -
MH325BR-6 Helical Piles 44 Ton Ultimate – 22 Ton Allowable Capacity
Download Cut Sheet -
MH325B Helical Piles 33 Ton Ultimate – 16.5 Ton Allowable Capacity
Download Cut Sheet -
MH313B Helical Piles 18 Ton Ultimate – 9 Ton Allowable Capacity
Download Cut Sheet